Punch Timing Belt

Punch Timing Belt

The timing belt is a steel belt or glass fiber as a strong layer, and is covered with an endless belt of polyurethane or neoprene. The inner circumference of the belt is toothed to mesh with the toothed belt pulley. When the belt is driven, the transmission ratio is accurate, the force on the shaft is small, the structure is compact, the oil resistance, the wear resistance is good, and the anti-aging performance is good. The general use temperature is -20°C-80°C, v<50m/s, P<300kw, i<10, for drives that require synchronization, can also be used for low speed drives.
Chat Now

Product Details

Punch belt

  • Accurate transmission, no slippage during operation

  • Smooth transmission with cushioning and shock absorption

  • High transmission efficiency and obvious energy saving effect

  • Large speed ratio range and long transmission distance


Partial information product parameters

ModelPitch(mm)Tooth height(mm)Belt thickness(mm)Angle(β °)


MXL
2.0320.511.1440
XL5.0801.272.3050
L9.5251.913.6040
H12.702.294.3040
XH22.2256.3511.2040
XXH31.7509.5315.7040
T2.52.50.71.3040
T5
5
1.202.2040
T10102.504.5040
T20
205.008.0040
AT5
51.202.7050
AT10102.505.0050
AT20205.008.0050

image

Rubber timing belt structure

1、Glass fiber tensile layer

The glass fiber tensile layer is a rope composed of a plurality of glass fibers, which is spirally wound along the width of the tape at the knot position of the tape, and has high strength, small elongation, good wear resistance and heat resistance.

2、The rubber strap

The rubber strap, which firmly bonds the glass fiber to the knot position, plays the role of protecting the tensile material, and prevents the damage caused by friction when the strap is needed in the transmission.

3、Rubber toothed

The toothed teeth are composed of rubber with high shear strength and appropriate hardness. It requires precise molding and precise distribution to match the groove of the pulley. The root of the tooth should be kept at a specified distance from the pitch line. The bending is the pitch. No change

4、Nylon cloth cladding

The nylon cloth layer is an anti-friction part of the protective tape and has excellent wear resistance. It is composed of a nylon cloth with a small friction coefficient.

Tips:

 Because the conveyor belt is a customized product, it is affected by factors such as length, width, thickness and processing method. The price is not the same, the online price is only the reference price, not the actual price. For more details, please contact customer service



Inquiry