Nylon Conveyor Belt

Nylon Conveyor Belt

It is made of multi-layer nylon canvas bonded together in a certain way, and it is covered with strong and elastic wear-resistant rubber.   Send small and medium block / granular / powdery object, suitable for high speed, medium and long distance impact resistance of large transport.
Chat Now

Product Details

It is made of multi-layer nylon canvas bonded together in a certain way, and it is covered with strong and elastic wear-resistant rubber.



 


Send small and medium block / granular / powdery objects, suitable for high speed, medium and long distance impact resistance of large transportation. Variety: by cover


 


Glue performance can be divided into general-purpose type and wear-resistant type/flammable type. Nylon core conveyor belt has thin body, high strength and high pressure resistance.


 


Good impact, good inter-layer adhesion, excellent flexibility and long service life, suitable for medium and long distances


 


The material is conveyed under high load and high speed conditions. Model: NN80, NN125, NN100, NN150, NN200, NN300,


 


NN400; common type conforming to the standard: GB/T7984-2001; general flame retardant type conforming to the standard: GB/T10822-89 specification (1)


 


Bandwidth: 100mm-3000mm (2) Cloth: 2-8 layers (3) Covering glue: Working surface: 1.5-8mm Non-working surface: 0mm-

image

 


Compared with ordinary cotton cloth core conveyor belt, 4.5mm nylon conveyor belt has high strength, good elasticity, impact resistance, light weight and


 


Good groove and other advantages, it can be effective


 


Reduce transportation costs and achieve high-speed, long-span, long-distance transportation.

image

Nylon base belt drive storage and use instructions


The nylon base belt is made of high-strength nylon base with tensile layer and wear-resistant leather or rubber. It should be noted during storage:


1. When storing, avoid direct sunlight, place it in the dark place as much as possible, half a meter above the ground, and level it in the horizontal direction. It is strictly prohibited to be deformed by extrusion.


2. According to the marked pulley surface, the running direction arrow and the tension mark are installed to ensure the parallelism of the pulley.


3. The standard elongation of the belt is 1.8%. After tensioning for 2-3 minutes, after the tension is evenly distributed, stop and measure the tension, mark whether the original tension range is maintained, and then fill the situation according to the situation.

image

Inquiry

[[JS_PcIm]]