Polyester EP Conveyor Belt

Polyester conveyor belt, also known as EP conveyor belt, wear-resistant conveyor belt, automatic conveyor belt, cement conveyor belt, high modulus, low elongation, good heat resistance, impact resistance, suitable for medium and long distance, High-density, conveying materials at high speeds. Used in coal, mining, port, metallurgy, electric power, chemical and other fields to transport materials. According to the different properties of the cover rubber, it is divided into cold-resistant type, acid-resistant type, alkali-resistant type, oil-resistant type and wear-resistant type.

Product Details


(1) Core material: EP100, EP150, EP200, EP250, EP300, EP350, EP400, EP450, EP500

(2) Bandwidth: 100mm-3000mm

(3) Cloth: 1-10 layers

(4) Covering glue: working surface: 0-10mm non-working surface: 0-6mm

Physical properties of the overlay of the polyester conveyor belt:

Overlay performance levelTensile strength Mpa, ≥Elongation at break % ≥Wear rate mm 3 ≤Tensile strength and elongation at break after 70 o C×168h days of aging
Strongly split24.0
Strong wear type18.0400100-25~+25
General type15.0350200-25~+25

Layer bond strength: (the highest peak value of all samples must not exceed 20N / mm)

projectCloth floorBetween cover layer and cloth layer
Cover thickness 0.8~1.5mmCover thickness >1.5 mm
Average value of all samples N / mm ≥
Minimum peak value of all samples N / mm ≥3.9

The general flame retardant type meets the requirements of GB10822-89 standard covering physical properties:

Cover tensile strength Mpa is not less than10
The elongation at break of the cover layer is not less than350

Note: Physical properties of general flame retardant tape without overcoat layer thickness less than 2.0mm

Interlayer adhesion strength:

Indicator projectCloth floorBetween cover layer and cloth layer
Cover thickness ≤ 1.5 mmCover layer >1.5 mm
The longitudinal sample average is not less than5.0
The minimum peak value of the longitudinal specimen is not less than3.9





1. High strength, thin body and light weight

2. Use EP dipped canvas as the skeleton material

3. The belt body is soft, the groove is good, and the elasticity is good.

4. Impact resistance, wear resistance, corrosion resistance

5. Adapt to larger load, faster and medium and long distance material transportation

6. Smooth operation, no deviation

Joint calculation


Conveyor belt joint cutting length formula calculation:

L=L+(n-1)S+1/2B (single)

L=M[ L +(n-1)S]+1/2B (multiple)

Inner circumference of inner-annular conveyor belt (m)

B — conveyor belt width (m)

n — the number of layers

s — length of each layer of cloth (m)

M — number of conveyor belts


Hot Tags: polyester ep conveyor belt, China, manufacturers, suppliers, factory, buy


You Might Also Like