Polyester Belt Conveyor

Polyester Belt Conveyor

The polyester transmission belt is made of special synthetic carboxylated nitrile rubber as the driving and friction layer, the thermoplastic high polymer elastomer is used as the composite transition layer, and the high strength and low elongation polyester fabric is used as the strong skeleton layer.
Chat Now

Product Details

The polyester transmission belt is made of special synthetic carboxylated nitrile rubber as the driving and friction layer, the thermoplastic high polymer elastomer is used as the composite transition layer, and the high strength and low elongation polyester fabric is used as the strong skeleton layer.

20161010091252_0885

Product introduction

The polyester transmission belt is made of special synthetic carboxylated nitrile rubber as the driving and friction layer, the thermoplastic high polymer elastomer is used as the composite transition layer, and the high strength and low elongation polyester fabric is used as the strong skeleton layer.

Product Features

1 fixed strength, stable tension


Compared with the base tape, the 1% stretch strength of the polyester tape is 30% to 50% higher, that is, a thinner belt can be used to transmit the same power without repeated adjustment of the tension. The operation is stable, the tension is moderate, the speed is not easy to be lost, the bearing load is relatively reduced, and the power consumption is saved.


2 belts are light in weight


The skeleton material of the polyester belt is a high-strength polyester fabric with special structure. The belt body is thin and light in weight, which reduces the moment of inertia and centrifugal force of the flat belt, and reduces the electric energy consumed by itself and saves electricity consumption.


3 soft and flexible


Since the polyester belt has a soft body, the belt body and the pulley have good wrapping properties, the bending stress is reduced, the energy consumption is small, the transmission efficiency is improved, and the power saving is relatively.


4 joints fast and environmentally friendly


The joint adopts tooth-type hot-melt bonding, the joint is smooth, no adhesive is applied, no direction is restricted in operation, and installation time is saved.


Inquiry