How To Maintain The Belt Conveyor

- Aug 10, 2017 -

The daily maintenance of the belt conveyor is very important. So how is the maintenance of the right? Here to explain the operation for everyone to pay attention to:

1. During the operation, should pay attention to prevent tape deviation, so that tape always in the center line operations.

2. Check the rubber scraper of the cleaning device, whether it is severely worn and can not be in close contact with the tape, if necessary, should be adjusted or replaced rubber scraper.

3. Check the tape joint parts are abnormal, such as cuts, cracks, and other causes of damage.

4. Keep each roller rotating flexible, replace the rotor,

5. Whether the tape on the upper and lower layers of wear and tear, the ribs are wear and tear.

Second, it is necessary to do regular maintenance work:

1. Timely replacement and repair of tape.

2. Each part of the bearings need regular refueling.

3. Replace the worn parts.

4. Check the anchor bolts and the beam connection bolts firmly to re-tighten the work.

Equipment after each operation is completed, the need for timely cleaning and inspection. This can avoid the occurrence of other accidents, which requires a lot of attention.