The splice of the conveyor belt is an important criterion to measure whether the conveyor belt can be used normally at the end:
Problems with unqualified connectors:
1, conveyor belt deviation: directly lead to the device can not be used to run to one side
2. Unified Alice at joints, affecting service life
3, direct fracture, conveyor tension will lead directly to the conveyor belt tear
How to connect the opening of the conveyor belt requires attention to detail in the cutting process:
1, use square
2. Place one side of the square close to a reference edge of the cutting conveyor belt, and then draw a vertical cutting line so that the cut out conveyor belt will not run away!