Conveyor Belt For Sale

- Jan 23, 2019-

Pu conveyor belt wave ribs use tips

The corrugated rib conveyor belt is widely used in the material transportation industry. It has many advantages, such as large transportation volume, material is not easy to leak, slipping, etc., and is well received by customers. So what are the precautions in the use of the wave-shaped ribs during use?

image

1. Use a rib conveyor belt to prevent folding and hard object phase pressure. Should be used and kept in a curl


2. If there is slipping or pulling in the use of the rib conveyor belt, the fault should be eliminated in time, the tensioning system should be adjusted, and the elastic device should be kept flexible.


3. Do not let the belt run off or snake running during transportation, it should be adjusted in time.

--The correct use of the conveyor belt

The use of ordinary conveyor belts, food skirt conveyor factory direct sales, there are many needs, here we help you analyze the correct use of conveyor belts, Dongguan food skirt conveyor belt, I hope to help you.


1. Prevent the conveyor belt from starting.


2. When the conveyor belt runs off, measures should be taken to correct it in time.


3. Conveyor belts of different types and sizes are not suitable for use together, and the joints are glued.


4. The type, structure, specification and number of layers of the conveyor belt should be reasonably selected according to the conditions of use.


5, the conveyor belt running speed is generally not more than 2.5m / s, the block size is large, the food skirt conveyor belt how much money, the abrasive material and the use of fixed pear discharge device should try to use low speed.

image

Before the rubber belt in the belt conveyor is put into operation, in order to ensure the tension and friction between the belt and the transmission drum, the normal conveyor belt joint butt only considers one joint maintenance margin, and after a period of operation, the belt joint There will be peeling, natural aging, opening of the rubber layer, gaps between the joints of the two joints, etc., resulting in a significant decrease in tensile strength at the joint, and the food skirt conveyor is sold, in order to ensure the safe and stable operation of the belt conveyor, according to the conveyor The maintenance cycle needs to cut off the joint, re-manufacture a joint, and carry out the second repair when the conveyor belt joint is used. The traditional overhaul process is because the joint balance of the two joints is smaller than the joint bonding size or the joint overlap of the two joints is close to zero. Replace the entire conveyor belt and partially replace a new rubber belt to repair the joint

image