Conveyor Belt For Dirt

- Jan 20, 2019-

The conveyor cleaner is a device for cleaning the conveyor. When the belt conveyor conveys the material, if the residual material enters the drum or the roller bearing housing, the bearing wear will be accelerated, and the roller or roller surface will be glued. Tearing and napping the conveyor belt to accelerate the wear and tear of the conveyor belt.

The cleaning device of the conveyor belt can be roughly divided into three parts: a head cleaner, a middle cleaner, and a tail cleaner. They have different divisions and roles.

    Head cleaner:

    The head cleaner is used for the cleaning work on the belt unloading roller return belt. The cleaner is matched with the belt conveyor, and the cleaner is equipped with a weight tightening or a spring tension.

    Quantity: 1 belt of ordinary belt conveyor, 2 belts of strong belt conveyor, cleaning medium: ordinary belt conveyor uses rubber strip, strong belt conveyor uses alloy or polyurethane.

    Central Cleaner:

    It is also used to clean the non-working surface of the belt, so that the material adhering to the lower belt surface is transferred to the lower roller and the reversing roller as little as possible.

    Installation position: 5m behind the unloading point in the middle of the belt, or 2/3 position of the belt conveyor body (distance from the nose).

    Quantity: At least 1 belt conveyor, at least 2 belt conveyors, cleaning medium: ordinary belt conveyor using rubber strip, strong belt conveyor using rubber strip or polyurethane.

    Tail section cleaner:

    Responsible for the cleaning of the non-working surface in front of the belt conveyor.

    Quantity: At least one.

    Cleaning media: ordinary belt conveyors use rubber strips, strong belt conveyors use rubber strips or polyurethane. Installation position: within 5 meters in front of the tail buffer roller holder.