Rotary encoder is a commonly used electronic component, which is widely used in automotive electronics, home audio, multimedia, mixing consoles, walkie-talkies, electronic toys, home, aerospace, military, etc. When we are using When rotating the encoder, you should understand the basic common sense of the lower rotary encoder.
First, the role of rotary encoder: rotary encoder device is mainly to help the speed conversion into a voltage signal, although the accuracy is relatively low in the whole process, but the operation is very reliable, need to be read into the computer system through the relevant conversion, presented to the user reliable The data.
Second, rotary encoder classification: The rotary encoders on the market are roughly divided into incremental encoders and absolute encoders. You should select suitable devices according to your actual needs, so that high-performance detection can be achieved. Give yourself more reliable data.
Third, the application of rotary encoders: We found that rotary encoders are now used in solving components, correcting components and servo motors, especially for position control systems and speed control systems in different fields, it plays a very important role. effect.
Fourth, rotary encoder installation instructions: When installing such devices, you must ensure that the size and specifications of the encoder you choose can meet the relevant installation standards for hole position, shaft diameter and so on.
V. Rotary Encoder Connection Notice: When the encoder and the machine are connected to the vertical axis, it must be ensured that the load cannot exceed its maximum limit, and there is no deviation problem.
6. Rotary Encoder Installation Precautions: Since different types of rotary encoders are installed, they need to be locked with corresponding parts to avoid looseness during operation. When selecting screws, be sure to pay attention to whether the encoder model, specifications, etc. are suitable.
7. Rotary Encoder Connection Conveyor Note: If it is connected by a conveyor belt, then the timing belt must be used, otherwise the angle of transmission may not be accurate enough.