Conveyor Belt Edmonton

- Jan 15, 2019-

Product feature editing

1. This product is made of cotton canvas (CC) or cotton-cotton interwoven dipped canvas (VC) by calendering, molding and vulcanization.

2, the product adapts to the requirements of different use conditions, can be made into different structures such as edging, open edge, middle ladder, side ladder



(1) Core material: polyester-cotton interwoven fabric TC-70, cotton canvas CC-56

(2) Bandwidth: 300mm-3000mm

(3) Cloth: 1-12 layers


(4) Covering rubber thickness: working surface: 1.5-10mm Non-working surface: 0mm-6mm.

The conveyor belt is made of a fiber fabric as a core, and is made of a general rubber as a covering material, and the surface is smooth and flat (Fig. 1. The core is a layered or integral fabric woven from fibers such as cotton, nylon, polyester or vinylon. Fiber is the earliest core material used, easy to bond with rubber. The strength is slightly improved in wet state, but the breaking strength is low (mostly around 56 N/(mm·layer)). The anti-corrosion and mildew resistance is poor, and the use is decreasing. In the late 1950s, nylon fiber fabrics were used as the core material, and it has become the largest amount. The nylon fiber has a strength of up to 700 N/m2, which is resistant to water, corrosion and bending fatigue; Larger. The properties of polyester fiber are similar to those of nylon fiber, and the elastic elongation is only half of that of nylon fiber. It is a promising material. Vinylon fiber strength is 200 N/m2, elastic stretch Longer than nylon fiber, easy to bond with rubber, good heat resistance, but the strength is reduced by 10~25% in wet state, only in a few countries such as China, Japan, etc. Only one fiber can be used when braiding the core , also available in two fibers Blended or interwoven.

3. Ordinary conveyor belt is widely used in building materials, chemical industry, coal, electric power, metallurgy and other departments. It is suitable for conveying non-corrosive non-stabbing block, granular and powder materials at room temperature, such as coal, coke and sand. Stones, cement and other bulk materials (materials) or pieces of articles, transport bulk density of 6.5 ~ 2.5t / m3 of various bulk, granular, powder and other loose materials, can also be used for the delivery of adult goods.