Introduction of the climbing conveyor belt and the method of commissioning and installation!

- Jun 21, 2019-

In order to prevent the material from tilting backwards during transportation, the climbing conveyor belt is usually selected, and a baffle is added on the conveyor belt, which can effectively prevent the material from sliding backward. Then Mingcheng Transmission will briefly tell you about the knowledge of climbing conveyor belts.

     Introduction to the climbing conveyor belt:

     A climbing conveyor belt is a type of belt conveyor. The conveyor of the climbing conveyor belt is suitable for continuous conveying of goods on floors or between heights. If the friction of the bottom of the cargo is large enough, a non-slip belt with a pattern on the surface can be used; a large-angle climbing belt conveyor requires a baffle and a skirt on the belt.

Climbing conveyor belt

Rack optional material: carbon steel, stainless steel, aluminum alloy.

     Belt material selection: PVC, PU, rubber, Teflon.

     Climbing conveyor belts for the industry: light industry, electronics, food, chemicals, wood, machinery and other industries

     Application characteristics of the climbing conveyor belt: The conveyor of the belt conveyor is stable, and the material and the conveyor belt have no relative movement, which can avoid damage to the conveyed material. The noise is small, suitable for occasions where the working environment is relatively quiet. The structure is simple and easy to maintain. Low energy consumption and low cost of use.

Green climbing conveyor belt

The conveyor belts of the climbing belt are: canvas belt (or nylon belt), plastic belt, anti-static PVC conveyor belt, rubber belt (heavy objects are made of rubber belt with steel wire), metal mesh belt and so on.

     The angle of the climbing conveyor belt: it is best not to exceed 13 degrees. If it exceeds 13 degrees, add a strip or belt on the surface of the belt to choose a belt with friction. When making a climbing belt conveyor, it is usually necessary to add a fence on the sides of the belt conveyor or add a side edge on the side of the belt to prevent objects from falling during transportation.

     Steps to debug the climbing conveyor belt:

Ring climbing conveyor belt

(1) After the installation of each equipment, carefully adjust the belt conveyor to meet the requirements of the drawings.

     (2) Each reducer and moving parts are filled with the corresponding lubricating oil.

     (3) After the installation of the belt conveyor meets the requirements, each single equipment is manually tested, and the belt conveyor is combined to meet the requirements of the operation.

     (4) Debug the electrical part of the belt conveyor. Including the debugging of conventional electrical wiring and actions, so that the equipment has good performance, to achieve the design function and status

Climbing conveyor belt conveyor